USB Type-C 16-Pin IP67 LIM Waterproof Receptacle UC3210492E1

The VITALCONN UC3210492E1 is a USB Type-C 16-pin IP67 LIM waterproof receptacle with PA46 high-temp housing and one-piece LIM sealing for outdoor enclosures.

Mounting Type

On-Board SMT 3.43mm + 4-Leg Through-Hole

Pin Count

16-Pin

USB Standard

USB Type-C

Ingress Protection

IP67 (LIM)

Current Rating

5A (VBUS/GND), 0.25A (signal)

Voltage Rating

20V DC

Contact Plating

Gold 1u" Min

Housing Material

PA46 HFX33S, UL94V-0

Shell Material

SUS304/SUS316L Stainless Steel

Operating Temperature

-40C to +85C

Product Overview

The UC3210492E1 USB Type-C 16-pin IP67 LIM waterproof receptacle from VITALCONN delivers sealed USB Type-C connectivity for industrial and outdoor enclosures with a one-piece LIM (Liquid Injection Molding) construction. Featuring on-board 3.43mm height, CH=1.65mm contact height, four-leg through-hole mounting, and integrated silicone sealing, the UC3210492E1 withstands IP67 temporary water immersion (1m depth, 30 min). The PA46 HFX33S UL94V-0 housing provides enhanced high-temperature resistance, while C7025 phosphor bronze terminals with 1u” gold plating ensure 10,000 mating cycles of reliable connectivity at -40C to +85C.

Product Specifications

ParameterValue
Model NumberUC3210492E1
Product TypeUSB Type-C 16-Pin IP67 LIM Waterproof Receptacle
Pin Count16-Pin
Mounting StyleOn-Board SMT (3.43mm), CH=1.65mm, 4-Leg Through-Hole
ConstructionOne-piece LIM (Liquid Injection Molding)
Ingress ProtectionIP67 (Temporary Immersion 1m, 30 min)
Rated Current5A (VBUS/GND), 0.25A (signal)
Rated Voltage20V DC Max
Contact Resistance40mΩ Max (50mΩ after test)
Insulation Resistance100MΩ Min
Withstanding Voltage100V AC R.M.S.
Mating Cycles10,000 cycles minimum
Insertion Force5-20N
Withdrawal Force8-20N (6-20N after test)
Operating Temperature-40C to +85C (80% RH Max)
Salt Spray24 hours
SolderingReflow 245±5C 5s; Profile 220C 60s min, 260C peak 10s min
Housing MaterialPA46 HFX33S, UL94V-0, Black
Contact MaterialC7025 Phosphor Bronze
Contact PlatingGold 1u” Min contact; G/F solder; Ni 30u” overall
Shell MaterialSUS304 Stainless Steel
Inner ShellSUS316L Stainless Steel
Middle ClipSUS301 Stainless Steel
Sealing RingLSR (Liquid Silicone Rubber), Black
RoHS ComplianceYes
Table: UC3210492E1 USB Type-C 16-pin IP67 LIM waterproof receptacle specifications

Key Features

  • LIM One-Piece Construction: Liquid Injection Molding creates a seamless silicone seal eliminating gasket assembly steps.
  • IP67 Temporary Immersion: Withstands water immersion up to 1m for 30 minutes.
  • PA46 HFX33S Housing: Polyamide 46 with enhanced thermal performance.
  • 16-Pin USB Type-C: Reversible Type-C specification compliance.
  • 5A/20V USB PD: VBUS/GND 5A continuous for fast-charging up to 100W.
  • SUS316L Inner Shell: Marine-grade stainless steel for corrosion resistance.

Applications

  • Marine electronics with deck-level exposure
  • Industrial HMIs in food processing and wash-down environments
  • Outdoor IP cameras and weatherproof security devices
  • Agricultural IoT and weather stations
  • Charging docks and outdoor kiosks
  • Medical devices requiring wash-down sanitization

Compliance and Standards

  • USB Type-C Cable and Connector Specification (USB-IF)
  • IEC 60529 — IP67 ingress protection rating
  • UL94V-0 flammability rating
  • RoHS 2.0 / REACH environmental compliance

Frequently Asked Questions

What is LIM construction?

LIM (Liquid Injection Molding) creates a one-piece silicone seal molded directly onto the connector, eliminating gasket assembly steps and providing superior long-term sealing reliability.

Why PA46 housing?

PA46 provides higher heat deflection temperature and better dimensional stability under thermal stress than standard LCP.

Why Choose VITALCONN?

VITALCONN is a trusted USB Type-C LIM connector manufacturer with 200+ employees and ISO-9000 certified facilities. Serving JABIL, H3C, KAON, and Free across industrial, marine, and automotive markets worldwide.

Refer to the attached datasheet for LIM sealing dimensions, PCB layout, and PCB-to-seal clearance guidelines (0.10-0.15mm recommended).

询盘表单

Request Sample and Quote

Share Part:

We are here to help!

Get in touch with our product experts.

Прокрутить вверх